Analisis Pengembangan Produk Tongkat Lansia
DOI:
https://doi.org/10.36722/sst.v6i2.783Abstract
The aging process brings various consequences in the form of physical, mental, and social problems so that an elderly person experiences limitations. The limitations of the elderly in carrying out their activities, especially in foot movement when walking, therefore a walking aid is needed. Each walking aid has a different function and usage method, one of which is a cane. Canes are often used to help balance, widen the stride and lower the weight on the legs. Safe and comfortable use is essential for the cane to function properly in assisting walking function. Canes still do not have a new design that suits the needs of the elderly. In this study, the development of a cane product for the elderly was carried out which was adapted to the ergonomic aspects and ideal aesthetic aspects. The aim is to provide convenience for the elderly in carrying out activities despite their limitations. Based on the research of the report on product development, namely Tongkat Wusaji using the Garvin Dimension method which is supported by 5 parts, namely performance, durability, features, serviceability, and aesthetics. It was found that the product concept applied to the Wusaji Stick uses aluminum material which has a product resistance of more than 3 years. The Wusaji stick has a minimalist design that is supported by the Bfinders and auto adjustable features and there are ergonomic usage procedures. Tongkat Wusaji has a product selling price of Rp. 250,000.
Keywords: Identify customer needs, Product development, Product specifications, Industrial design
References
F. I. Prihandono, H. S. Nugraha dan A. Budiatmo, “Analisis Pengembangan Produk Radio Kayu Magno (Studi pada CV. Piranti Woks Kecamatan Kandangan Kabupaten Temanggung),†Jurnal Ilmu Administrasi Bisnis , vol. 5, no. 1, pp. 145 - 154, 2016.
D. S. Nugroho, F. N. Murti, M. D. Rivero, M. Noviandy, S. N. Trisaid, A. T. Purwandari, S. B. Ismoyo dan N. Parwati, “Pengembangan Produk Tempat Sampah Penghancur Plastik Berbasis Green Technology,†Jurnal AL-AZHAR INDONESIA SERI SAINS DAN TEKNOLOGI, vol. 4, no. 4, 2018.
T. Rochman, R. D. Astuti dan R. Patriansyah, “Peningkatan Produktivitas Kerja Operator melalui Perbaikan Alat Material Handling dengan Pendekatan Ergonomi,†Performa: Media Ilmiah Teknik Industri, vol. 9, no. 1, 2010.
W. T. Bhirawa dan Sutarno, “Analisis Perancangan dan Pengembangan Produk Kursi Santai di PT. Trimitra Mebelindo,†Jurnal TI, vol. 2, no. 2, pp. 150 - 176, 2016.
M. F. R. Lubis dan Masnun, “Perlindungan Desain Industri dalam Upaya Memajukan Produk Lokal dalam Era Revolusi Industri
0,†Jurnal Pendidikan, Sejarah, dan Ilmu - Ilmu Sosial, vol. 4, no. 2, 2020.
B. N. Sari, O. Komarudin, T. N. Padilah dan M. Nurhusaeni, “Bill of Material (BOM) Pada Sistem Inventori Kawasan Berikat untuk Pelacakan Material Movement,†ILKOM Jurnal Ilmiah Volume, vol. 10, no. 3, 2018.
M. Aulady dan C. Orleans, “Perbandingan Durasi WaktuProyek Konstruksi AntaraMetode CriticalPathMethod(CPM) dengan Metode Critical Chain Project Management(Studi Kasus: Proyek Pembangunan Apartamen Menara Rungkut),†Jurnal IPTEK, vol. 20, no. 1, 2016.
W. D. A, D. F. S dan I. Puspitasari, “Optimalisasi Waktu Proses Produksi Olahan Apel di Ramayana Batu dengan Menggunakan Algoritma Network Flow,†Malang, Universitas Negeri Malang, 2012.
S. Perdana dan A. Rahman, “Penerapan Manajemen Proyek dengan Metode CPM (Critical Path Method) Pada Proyek Pembangunan SPBE,†Amaliah: Jurnal Pengabdian Kepada Masyarakat, vol. 3, no. 1, 2019.
